Materials

plavitex

Waterproof material with polyester backing, PVC coated on one side. It is characterized by tear resistance and waterproofness. The chemical composition of the coating guarantees resistance to adverse weather conditions, retaining its properties at temperatures down to -50°C. The material meets the requirements of EN 343 (resistance to water penetration in the highest class 4 - water column pressure over 20000 Pa), which was confirmed in tests conducted by an accredited textile testing institute.


plavitex acid

Waterproof material with polyester backing, coated with PVC. It is characterized by tear resistance and waterproofness. The chemical composition of the coating has acid-protective properties that guarantee resistance to adverse weather conditions, retaining its properties at temperatures down to -50°C. The material meets the requirements of EN 343 (resistance to water penetration in the highest class 4 - water column pressure over 20000 Pa) and EN 14605, which was confirmed in tests conducted by an accredited textile testing institute.


plavitex fluo

Waterproof material with polyester backing, PVC coated on one side. It is characterized by increased visibility as well as tear resistance and waterproofness. The chemical composition of the coating guarantees resistance to adverse weather conditions, retaining its properties at temperatures down to -50°C. The material meets the requirements of EN 343 (resistance to water penetration in the highest class 4 - water column pressure over 20000 Pa) and EN ISO 20471, which was confirmed in tests conducted by an accredited textile testing institute.


plavitex multi

Waterproof material with cotton backing, PVC coated on one side. It is characterized by increased visibility as well as tear resistance and waterproofness. The chemical composition of the coating has antistatic and flame-retardant properties and guarantees resistance to adverse weather conditions, retaining its properties at temperatures down to -50°C. The material meets the requirements of EN 343 (resistance to water penetration in the highest class 4 - water column pressure over 20000 Pa), EN 1149-5, EN ISO 20471 and EN ISO 14116, which was confirmed in tests conducted by an accredited textile testing institute.


plavitex antistatic

Waterproof material with polyester backing, PVC coated on one side. It is characterized by tear resistance and waterproofness. The chemical composition of the coating has antistatic properties and guarantees resistance to adverse weather conditions, retaining its properties at temperatures down to -50°C. The material meets the requirements of EN 343 (resistance to water penetration in the highest class 4 - water column pressure over 20000 Pa) and EN 1149-5, which was confirmed in tests conducted by an accredited textile testing institute.


plavitex heavy duty

Waterproof material with polyester backing, PVC coated on one side. It is characterized by increased tear resistance and waterproofness. The chemical composition of the coating guarantees exceptional resistance to adverse weather conditions, retaining its properties at temperatures down to -50°C. The material meets the requirements of EN 343 (resistance to water penetration in the highest class 4 - water column pressure over 20000 Pa), which was confirmed in tests conducted by an accredited textile testing institute.


plavitex hd antistatic

Waterproof material with cotton backing, PVC coated on one side. It is characterized by tear resistance and waterproofness. The chemical composition of the coating guarantees resistance to adverse weather conditions, retaining its properties at temperatures down to -50°C. The material meets the requirements of EN 343 (resistance to water penetration in the highest class 4 - water column pressure over 20000 Pa), which was confirmed in tests conducted by an accredited textile testing institute.


plavitex hd fluo

Waterproof material with polyester backing, PVC coated on one side. It is characterized by increased visibility as well as tear resistance and waterproofness. The chemical composition of the coating guarantees exceptional resistance to adverse weather conditions, retaining its properties at temperatures down to -50°C. The material meets the requirements of EN 343 (resistance to water penetration in the highest class 4 - water column pressure over 20000 Pa), which was confirmed in tests conducted by an accredited textile testing institute.


plavitex chemo

Waterproof material with polyester backing, coated with PVC. It is characterized by tear resistance and waterproofness. The chemical composition of the coating has acid-protective properties and guarantees resistance to adverse weather conditions, retaining its properties at temperatures down to -50°C. The material meets the requirements of EN 343 (resistance to water penetration in the highest class 4 - water column pressure over 20000 Pa) and EN 13034, which was confirmed in tests conducted by an accredited textile testing institute.


provendex

Material on polyamide backing, coated on one side with polyurethane. It is characterized by resistance to tearing, adverse weather conditions and bending at temperatures down to -50°C.


rubber new generation

A new concept of PVC-coated material. It is characterized by tear resistance and waterproofness. Meets the requirements of EN 343 (resistance to water penetration in the highest class 4 - water column pressure over 20000 Pa), which was confirmed in tests conducted by an accredited textile testing institute. No maintenance is required.


sealskin

Material coated on one side with polyvinyl chloride. It is characterized by high tear and tensile resistance and waterproofness. The chemical composition of the coating is characterized by resistance to salt water and extreme weather conditions. The material retains its properties during use at low temperatures. Meets the requirements of EN 343 (resistance to water penetration in the highest class 4 - water column pressure over 20000 Pa), which was confirmed in tests conducted by an accredited textile testing institute.


opalo

Material coated on one side with polyvinyl chloride. It is characterized by high tear and tensile resistance and waterproofness. The chemical composition of the coating is characterized by high resistance to salt water and extreme weather conditions. The material retains its properties during use at low temperatures. Meets the requirements of EN 343 (resistance to water penetration in the highest class 4 - water column pressure over 20000 Pa), which was confirmed in tests conducted by an accredited textile testing institute.


PU

Polyurethane film is characterized by high resistance to mechanical damage and high and low temperatures. The chemical composition of the material guarantees proper protection against the action of fats, detergents, weak acids, bases and organic liquids.


aquaproof basic

Waterproof material on polyamide backing, coated on one side with polyurethane. It is a low-weight, high-strength material to provide proper protection and comfort during heavy work. It is characterized by high elasticity, tear resistance and waterproof seams. The chemical composition of the coating guarantees exceptional resistance to adverse weather conditions and bending at temperatures down to -50°C. The material meets the requirements of EN ISO 13688 and EN 343 (resistance to water penetration in the highest class 4 - water column pressure over 20000 Pa), which was confirmed in tests conducted by an accredited textile testing institute.


aquaproof vision

Superbly protects not only against water and wind. Thanks to the use of fluorescent pigments, it makes the wearer more visible and safe in conditions of reduced visibility at night. The material meets the requirements of EN ISO 13688, EN 343 (resistance to water penetration in the highest class 4 - water column pressure over 20000 Pa) and EN ISO 20471, which was confirmed in tests conducted by accredited textile testing institutes.


aquaproof food

A material designed for the production of garments for the food industry. A properly selected blend of coating components guarantees resistance to the penetration of fats, enzymes, digestive juices and the action of acid and alkali solutions. The material meets the requirements of EN 1186, which was confirmed in tests conducted by an accredited textile testing institute.


aQuaAir

aQuaAir is a series of modern laminated breathable fabrics with the highest waterproofing and breathability parameters. These materials are used to produce a wide range of protective clothing and outdoor clothing used during work and outdoor activities. They meet the requirements of EN 343 (resistance to water penetration in the highest class 4 - water column pressure over 20000 Pa and high breathability), which was confirmed in tests conducted by an accredited textile testing institute.


aQuaAir regular

aQuaAir REGULAR is a 2-layer fabric with lining and a waterproof breathable membrane. It meets the requirements of EN 343 standard (highest class 4 water penetration resistance – water column pressure exceeding 20000 Pa, and high breathability – highest class 4 water vapor resistance up to 15 Ret), as confirmed in tests conducted by an accredited institute specializing in textile material research.


aQuaAir easy see

aQuaAir EASY SEE is a 2-layer fabric with lining, a waterproof breathable membrane, and an outer fabric with fluorescent properties for high-visibility clothing. It meets the requirements of the EN 343 standard (highest class 4 water penetration resistance – water column pressure exceeding 20000 Pa, and high breathability – highest class 4 water vapor resistance up to 15 Ret), as confirmed in tests conducted by an accredited institute specializing in textile material research.


aQuaAir multi

aQuaAir MULTI is a 3-layer fabric with lining, a waterproof breathable membrane, and a multifunctional outer fabric. The fluorescent-colored material is resistant to fire, convective heat, and other hazards encountered during welding, chemical work, and explosive environments. It meets the requirements of the EN 343 standard (highest class 4 water penetration resistance – water column pressure exceeding 20000 Pa, and high breathability – good class 3 water vapor resistance up to 25 Ret), as confirmed in tests conducted by an accredited institute specializing in textile material research.


aQuaAir multi

XT4L is a modern and technologically advanced material with a high class of waterproofness (30000 mm H20 = class 4 according to the EN 343 standard) and vapor permeability (6500g/m2/24h = class 4 breathability according to EN 343). The material consists of 4 layers (fabric - 100% polyester, hydrophobic microporous coating - 100% polyurethane, non-porous hydrophilic membrane - 100% polyurethane, mesh knit/combined lining - 100% polyamide), which provide excellent protection against water while removing moisture and excess heat.

Information obligation: By continuing to use the website, you accept our Privacy Policy. More information on the Privacy Policy page. This site uses cookies - cookies to provide services at the highest level. By continuing to use the site, you agree to their use.